BUTURE Beta05 Manual Del Usuario página 4

· ABOUT THE TROUBLESHOOTING
In any of the following situations, the smart clamp will turn protections on:
Indicator
Solid red light
Solid red light with
slow and brief beeps
Solid red light with
quick and brief
beeps
Solid red light with
regular long and
short beeps
The green light
flashes 5 times, then
the red light is
always on
Other
·
Jump starter battery is low and needs to be
charged
·
Startup Timeout Protection
---Press the force start button for about 3S until the
indicator turns to steady green. It means that it
returns to work
·
Reverse Charge Protection
---Reconnect to try again
·
High Temperature Protection
---Remove the clamps to let it cool
·
Relay Short-circuit
---Jumper cable failure. Contact
support@ibuture.com
·
Short-circuit Protection
--- Do not connect smart clips together or to the
same metal
·
Reverse-connection Protection
--- Reverse smart clip to ensure right connection
·
Over Limit Protection
---Reconnect to try again
·
Five Intervals of Start-up Protection
---Press the force start button for about 3S until
the indicator turns to steady green. It means that it
returns to work
support@ibuture.com
Please contact
details
Situations
with details
with