Descargar Imprimir esta página

Metabo AS 36-18 L 20 PC Manual Original página 19

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 56
If the machine is defective, remove
the battery pack from the machine.
Remove the battery pack from the
machine before making any
adjustments, changing tools,
maintaining or cleaning.
Before fitting the battery pack,
make sure that the machine is
switched off.
Hold the machine when removing
and inserting the battery pack so
that the on/off switch cannot be
unintentionally pressed.
If the machine is defective, remove
the battery pack from the machine.
Do not remove the battery pack
when the device is in operation.
Before replacing the battery pack,
switch off the device.
Do not operate devices or
accessories under the following
conditions:
- If the device has recognisable
damage (cracks/breaks),
- Battery pack is defective,
- If there is a suspected non-visible
defect (after a fall).
Only use the device with the
battery cover closed. Keep the
battery cover closed, even when
the battery pack is not inserted.
After closing the battery pack
cover, check to ensure the locking
mechanism on the cover has
engaged.
Do not use the device in low (<-
20°C) or very high (>40°C) temper-
atures.
Transport of Li-Ion battery
packs:
The shipping of Li-Ion battery pack
is subject to laws related to the
carriage of hazardous goods (UN
3480 and UN 3481). Inform
yourself of the currently valid
specifications when shipping Li-Ion
battery packs. If necessary,
consult your freight forwarder.
Certified packaging is available
from Metabo.
Only send the battery pack if the
housing is intact and no fluid is
leaking. Remove the battery pack
from the machine for shipping.
Prevent the contacts from short-
circuiting (e.g. by protecting them
with adhesive tape).
7. Overview
See page 2.
1 Roll brake
2 Container
3 Sealing cap (only M/H devices)**
4 Suction opening
5 Toggle switch manual/auto**
6 Capacity and signal indicator
7 Capacity indicator button
8 Carry handle
9 Upper part
10 Fixture for case system
11 Case system unlocking mechanism
12 Volume flow control display (only M/H devices)
13 Compartment for battery pack
14 Switch eco/off/boost
15 Snap lock
16 Hand grip of case *
17 Rubber for hose fixing
18 Battery pack release
19 Battery pack
20 Capacity and signal display**
21 Button for capacity and signal indicator**
22 Roll protection/side handle
23 Rear end suction hose
24 Front end suction hose
25 Fixtures for vacuum cleaner bags
26 Fleece filter bag *
27 PE disposal bag *
28 Special filter bag H-class*
29 Accessory fixtures for nozzles and hose
30 Screws
31 Filter closure
32 Filter cover
33 Filter
34 Filter cage
35 Float
36 Connecting sleeve
37 Auxiliary air slide
ENGLISH en
19

Publicidad

loading