Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE AND CLEANING
IMPORTANT
Do not use steam cleaning equipment.
•
Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator ("H") is not displayed.
•
Important:
•
Do not use abrasive sponges or scouring pads as they may damage
the glass.
•
After each use, clean the hob (when it is cool) to remove any deposits
and stains from food residue.
•
A surface that is not kept suitably clean may reduce the sensitivity of
control panel buttons.
•
Use a scraper only if residues are stuck to the hob. Follow the scraper
manufacturer's instructions to avoid scratching the glass.
•
Sugar or foods with high sugar content can damage the hob and must
be immediately removed.
•
Salt, sugar and sand could scratch the glass surface.
•
Use a soft cloth, absorbent kitchen paper or a special hob cleaner (follow
the Manufacturer's instructions).
•
Spills of liquid in the cooking zones can cause the pots to move or vibrate.
•
After cleaning the hob, dry thoroughly.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Do not remove grounding wiring.
Do not use adapters
Do not use extension cord.
Failure to do so can result in death, fire or electrical shock.
If the iXelium™ logo appears on the glass, the hob has been treated with
iXelium™ technology, an exclusive Whirlpool finish which ensures perfect
cleaning results, as well as keeping the surface of the hob shiny for longer.
To clean iXelium™ hobs, follow these recommendations:
•
Use a soft cloth (microfibre is best) dampened with water or with
everyday glass cleaning detergent.
•
For best results, leave a wet cloth on the glass hob surface for a few
minutes.
EN
Publicidad
