Publicidad
Idiomas disponibles
Idiomas disponibles
1
ELECTRICAL CONNECTION
Electrical connection must be made before connecting the appliance to the electricity supply.
Installation must be carried out by qualified personnel who know the current safety and installation regulations. Specifically, installation must be carried
out in compliance with the regulations of the local electricity supply company.
Make sure the voltage specified on the data plate located on the bottom of the appliance is the same as that of the home.
Regulations require that the appliance be earthed: use conductors (including the earth conductor) of the appropriate size only.
•
It must be possible to disconnect the appliance from the power supply by unplugging it if plug is accessible, or by a multi-pole switch installed upstream
of the socket in accordance with the wiring rules and the appliance must be earthed in conformity with national electrical safety standards.
•
Do not use extension leads, multiple sockets or adapters. The electrical components must not be accessible to the user after installation. Do not use
the appliance when you are wet or barefoot. Do not operate this appliance if it has a damaged power cable or plug, if it is not working properly, or if
it has been damaged or dropped.
•
If the supply cord is damaged, it must be replaced with an identical one by the manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard - risk of electric shock.
2
x4
4
3
2
1
3
90°C
2
x4
Disconnect power before servicing.
Replace all parts and panels before operating.
Do not remove grounding wiring.
Do not use adapters
Do not use extension cord.
Failure to do so can result in death, fire or electrical shock.
WARNING
Electrical Shock Hazard
EN
x4
Publicidad
