MAJORITY Knapton DAB Manual Del Usuario página 7

Instructions Guide
EN
Basic Operation
Please note all (Ref.) refer to Page 4-6 Controls and Functions mapping guide.
Plug the DC 9V power supply into the back of the system via the DC 9V input
(Ref.30).
Connect the supplied rod-antenna to the antenna port at the rear of the device, screw
together by hand.
Note: do not tighten with a tool, tighten only by hand.
Once connected, the radio will pick up signal from DAB and the time should now set
itself automatically.
Press the 'Power/Standby' button (Ref.1) to turn off standby. When taken out of
standby mode, the screen will display the current mode.
7