audeeo AO-TWS1 Instrucciones De Uso página 3

EN
Operation Instructions
Connect the Type-C cable (only use the provided cable) to a computer USB port or a USB
1
wall charger. Plug the other end of the Type-C cable into the Type-C charging port (3)
located on the bottom of the earphones. While charging the LED indicator light (4) will flash
RED. When the battery is fully charged, the RED LED on the charging station will remain on.
Bluetooth Pairing: Ensure the earphones are turned off, then press the MULTI-FUNCTION
2
BUTTON (2) for 5 seconds to turn the earphones ON. The earphones will enter Bluetooth
pairing mode automatically and the LED INDICATOR LIGHT (1) will flash BLUE and RED.
Ensure Bluetooth is enabled on your smartphone, tablet , or music device. Your device will
start searching for wireless devices. The earphones will appear as "audeeo True Wireless 1"
in the list of available Bluetooth devices. Select "audeeo True Wireless 1" and connect. The
earphones will emit a tone to indicate that it has been successfully paired with your device.
1
2 2
BLUETOOTH
audeeo True Wireless 1
BLUETOOTH
audeeo True Wireless 1