Manuales relacionados para Franklin & Ben 7616
Resumen de contenidos para Franklin & Ben 7616
- Página 1 Item#7616 Classic 7-Drawer Double Wide Dresser Assembly Instructions Commode double à 7 tiroirs Classic Manuel d’assemblage revised 09OCT2023...
- Página 2 Thank you for purchasing a Franklin and Ben nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.franklinandben.com/support. For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly.
- Página 3 PARTS • PIÈCES Not to Scale/Pas à l'échelle B. Feet (4) B. Pieds (4) A. Dresser Body D. Middle support A. Cadre de la commode D. Support central HARDWARE • ACCESSOIRES DE MONTAGE Bolts in Actual Size/Boulons (taille réelle) H1. 3-1/8” Allen Head Bolt (4) H2.
- Página 4 ASSEMBLY INSTRUCTIONS • INSTRUCTIONS D’ASSEMBLAGE...
- Página 5 OPTIONAL / OPCIONAL / EN OPTION : Use the optional middle leg for added Adjustable screw to help provide stability. stability. Tornillo ajustable para ayudar a Utilice el soporte del centro opcional para proporcionar estabilidad. mayor estabilidad. Vis réglable pour aider à assurer la Utilisez le support central optionnel pour plus stabilité.
- Página 6 ANTI-TIP KIT INSTALACIÓN DEL KIT INSTALLATION DE LA INSTALLATION CONTRA VOLCAMIENTOS TROUSSE ANTI-BASCULEMENT Children have died from furniture tipover. To reduce the risk of furniture tipover, ALWAYS install tip over restraint provided. Han muerto niños al volcarse los muebles. Para reducir el riesgo de que se vuelque un mueble, SIEMPRE instale la sujeción contra volcamientos incluida.
- Página 7 Find your wall material and follow Determine el material de la pared y Trouvez votre propre matériau mural steps to attach the anti-tip kit to your siga los pasos para instalar el kit et suivez les étapes pour fixer la wall.
- Página 8 Fasten bracket to back of dresser. Fije el soporte en la parte posterior de la cómoda. Fixez le support à l’arrière de la commode. Place second bracket on the wall 1-2” (25-50mm) below the top of the dresser and mark holes. Ponga el segundo soporte en la pared a 25-50 mm (1-2 pulgada) debajo de la parte superior de la...
- Página 9 Fasten second bracket by screwing into plastic anchors or wood stud. Fije el segundo soporte atornillando en las fijaciones de plástico o el remache de madera. Fixez le deuxième support en vissant dans les ancrages en plastique ou le montant en bois.
- Página 10 Finish Terminé READ ALL INSTRUCTIONS BEFORE CHANGER TRAY IS NOT INCLUDED, USING THE PRODUCT. KEEP THE SOLD SEPARATELY. CHANGER TRAY INSTRUCTIONS FOR FUTURE USE. M0219 OR M0619 IS RECOMMENDED. Recheck all screws and bolts to be sure they are fastened securely. Do not overtighten. LA TABLE À...
- Página 11 ONE YEAR LIMITED WARRANTY: We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may process your warranty request.
- Página 12 Registering your product is even easier than before. You can register your product on our website at : www.franklinandben.com/registrations IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PARTS PLEASE VISIT US AT: www.franklinandben.com/parts OR YOU CAN CONTACT US BY MAIL: FRANKLIN AND BEN 8700 REX RD., PICO RIVERA, CA 90660 (323) 736-2693...