Husqvarna 525HE3 Manual Del Usuario página 3

Symbols on the product
Stop.
This product can be dangerous and cause
serious injury or death to the operator or
others. Be careful and use the product
correctly.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Always wear approved protective gloves.
Use stable boots with non-slip soles.
Stop the product fully before you touch the
cutting tool.
Keep all parts of your body away from the
hot surfaces.
Fuel.
yyyywwxxxxx
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.
1173 - 005 - 30.08.2023
The rating plate shows the serial number. yyyy is the production year and ww is the
production week.
Choke.
Air purge bulb.
Idle adjustment screw.
High speed needle.
Low speed needle.
There is no electrical insulation in this
product. If the product touches or comes
near high voltage power lines, it can
cause serious injury or death to the
operator. Electricity can move between
different objects by a curve. The higher
the voltage, the longer the electricity can
move. Electricity can also move through
branches and other objects, especially if
the object is wet. Always keep a distance
at a minimum of 10 m/33 ft between
the product and high voltage power lines.
Make sure that the power is off before
you start the work near the power lines.
Keep a distance at a minimum of 15 m/50
ft to other persons or animals during the
operation.
EPA III
3