Descargar Imprimir esta página

KSIX ASTRO Manual De Instrucciones página 2

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
Troubleshooting: If the headphones do not turn on when
tapping on the touch control for several seconds, it should
be due to low battery. If there is any connection issue, reset
the headphones as instructed later in this manual.
Usage method 
Use the touch control to make use of all the functions of the
device: 
Power on/Power off
Play/Pause
Previous/Next song
Volume -/+
Answer/Hang up calls
Reject calls
Voice assistants
How to reset the headphones
To reset the headphones, disconnect them, access your
device's Bluetooth settings, tap on KSIX ASTRO and then on
"Unpair". Turn them off, then on and repeat the pairing
process.
Charging the headphones
The headphones incorporate a USB-C port. To charge them,
use the charging cable included in the box or any other
compatible cable. Connect the USB-A connector of said
cable to a wall charger or a computer output and connect
the USB-C connector of the cable to the headphones.
When the headphones are charging, the LED indicator will
display a fixed red light. When they are fully charged the LED
indicator will not display any light.
Note: Please, if you use a wall charger to charge the
headphones, make sure that it is a 5V charger.
Troubleshooting: If the headphones LED indicator does
not turn on during the charge, it should be due to a power
supply issue. Please, check if the charging cable is correctly
connected to the headphones. Check both ends of the
cable, as well as the power supply state and the device you
are using to charge, whether it is a wall charger, a
powerbank or a PC port.
To power on, tap the touch
control for 2 seconds.
To power off, tap the touch
control for 6 seconds.
Tap the touch control
once.
To play the previous song,
tap the touch control 4
times.
To play the next song, tap
the touch control 3 times.
To decrease the volume,
tap the touch control 2
times.
To increase the volume,
tap the touch control for 2
seconds.
To answer an incoming
call, tap the touch control
once.
To hang up, tap the touch
control once.
To reject an incoming call,
tap the touch control 3
times.
To activate the voice
assistants, tap the touch
control for 4 seconds.

Publicidad

loading

Este manual también es adecuado para:

Bxtw12n