Insta360 CINSAAVG Instrucciones De Uso página 8

4.2.3 Wake up a Camera
Use the remote to wake up your camera. After connecting
to the camera for the first time, swipe down on the remote's
touchscreen to enter the connection interface, and choose one
of the following two ways to wake up the camera:
Connect: Wake up the last connected camera. The camera will
automatically connect to the remote once powered on.
QuickCapture: Wake up the last connected camera. The camera
will automatically connect to the remote and enter QuickCapture.
Notes:
• Ensure to activate "Bluetooth Wakeup" on the camera before
trying this feature.
• If connected with multiple cameras, the remote cannot
perform wake up on any camera.
•To use QuickCapture, make sure it is enabled on your camera.
• Press the remote's Shutter Button once to enter
QuickCapture. Long press the Shutter Button to connect to the
camera.
4.3. Control the Camera
When the camera is connected, operating on the screen of the
remote or pressing its buttons to control the camera.
4.3.1 Preview Page
When the camera is connected, the remote will display the
camera's corresponding information on the preview page.
1. Camera capacity
3. Battery level of the camera
5. Shooting mode
4
1
4
5
2. GPS signals
4. Preview page
6. Shooting specifications
2 3
6