Thule 301867 Instrucciones página 11

EN
Safety
WARNING: INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT
AVOIDED, COULD RESULT IN SERIOUS INJURY, MAJOR PROPERTY DAMAGE OR
EVEN DEATH.
NOTE: INDICATES FURTHER INFORMATION.
TIP: PROVIDES HELPFUL SUGGESTIONS.
A.0 GENERAL
A.1 The safety manual and all instructions must be read
and understood before the device is installed.
A.2 Both are part of the product and contain important
indications on how to install and power the product.
These indications must be respected by all people.
A.3
Leave a copy of this manual to the personnel
in charge.
A.4 If the device is handed over to another person, this
manual is to be handed over along with it.
A.5 Not reading, understanding and following this
manual can involve serious risks, including
malfunction, damage and injury.
B.0 SAFETY AND WARNINGS
B.1 Modifications to the product are not allowed. This
can be extremely dangerous and lead to serious
injury and/or damage.
B.2 Never leave children unattended with the packaging
material. The packaging material represents
a danger of suffocation. Children frequently
underestimate the dangers.
B.3 Never cut the led strip out of the indicated points.
B.4 Do not light the LED strip when it is rolled up. If
not correctly dissipated, it is allowed to turn the
POWER ON for 10 seconds to check if the LED strip
works. Only use SELV power supply, as for current
regulations. Do not use chemical products, glue,
solvent or acid for cleaning the LED strip surface.
It can damage or corrode the LED strip or the LED
surface and it can modify the CCT or the working life
of the LED strip.
B.5 Do not connect the LED strip to the line voltage.
B.6
Do not POWER ON before the LED strip is
connected.
B.7
Do not cover the LED strip.
SDC912-02
A.6 Keep the manual and all instructions for future
reference.
A.7 The latest version of this manual comes with the
device and is also available on www.thule.com.
A.8 Consult your local dealer if you have any questions
regarding the operations and limits of the products.
A.9 This light source is designed and marketed for use
in combination with original Thule RV (Recreational
Vehicles) accessories only.
B.8 Do not install the product near places with gas or
fuel vapor substances.
B.9 Do not hang up or fix objects to the LED strip.
B.10 Do not look directly towards the LED strip when it's
turned on.
B.11 To avoid damage to the LED lamps or the internal
circuit, do not mechanically stress or curve the LED
strip more than a diameter of 60 mm.
B.12 Do not bend or twist the LED strip.
B.13 To obtain the maximum performance, each 5 meters
must be connected to a proper power supply or a
controller. Several LED strips connected by a series
circuit can be affected by light drop.
B.14 Static electricity (ESD) may damage the LED strip.
It is recommended to use a wristband or anti-
electrostatic glove for handling the LED strip. It
is also recommended to take proper measures to
avoid surge voltage in the equipment where the LED
strip is placed.
B.15 Do not pull the connection cable after placing
the LED strip to avoid damage to the electrical
connection.
Thule LEDs
11
3