Using The Grater - REBER 9600 N Manual De Uso

ticlockwise, remove the knife (10), the plate (9) and the propeller (8). Remove the
cast iron body (7) from the reduction gear cover (6), then wash, carefully dry and
evenctually grease all the parts that have come into contact with the meat. Before
replacing the appliance it is advisable to put the red cap back on in the place of the
cap with bleed. "Reber" electric meat choppers are fitted for operation with plates
having holes of diameter from 3 mm to 12 mm. Reber snc decline all liability con-
cerning damage or accidents deriving from using plates having holes of diameter
greater than 12 mm.
GRATER UNIT
Body and handle in aluminium, roller in tin-plated steel and collection drawer in a
plastic material for foodstuffs. The grater is inserted onto the geared motor by means
of an axial revolution multiplier with nylon gears supplied in the package.

USING THE GRATER

Before operate, wash with boiling water and carefully dry all the parts that have
come into contact with the food.When the work is finished, undo the screws (11)
and remove the nylon cover (10) to take out the toothed roller (9) to which are fixed
the pin (4) and the small gear (3). Wash, carefully dry and evenctually grease all the
parts that have come into contact with the food. Before replacing the appliance it is
advisable to put the red cap back on in the place of the cap with bleed.
DOUGH MIXER UNIT
Dough mixer base in die-cast aluminium alloy; steel bevel reduction gear; mixing
shaft in precision-cast stainless steel AISI 316; mixer container and cover in highly
resistant semitransparent polycarbonate, detachable for easy cleaning (even in di-
shwasher). Safety switch preventing the mixer shaft from operating when the cover
is open. Suitable for any kind of dough: pasta, bread, pizza, cakes.
USING THE DOUGH MIXER
The unit is deliverd ready for use, efore operate, wash and carefully dry all the parts
that have come into contact with the food
The conical transmission of the dough mixer is lubricated with specific grease of
Long Life type which doesn't have to be changed or added.
The Accessories start key (13) must be used to let the motor start using the acces-
sories of the motor other than the dough mixer..
Make sure that the switch is in the position OFF before changing the accessories
and before introducing the blocking of the safety switch.
When changing the accessories, please follow carefully the installation instructions
supplied with the machine.
The machine is prepared for putting into practice:
-Remove the cap (7) rotating it counterclockwise.
-Fill in the tank (8) according to the quantities and ingredients mentioned in the pa-
31