Humanscale M/Connect 3 Instrucciones De Montaje página 10

Replacing the M/Power Hub
1
Remove any cables or devices plugged into the
M/Power Hub.
2
Remove the top cover by carefully pulling up
around the edges ①
3
Using a 3mm hex key, remove the screw
retaining the adapter cable and unplug the
cable ②
4
Using a 3mm hex key, remove the center
locking screw ③
5
Slide the M/Power Hub away from the back of
the desk and then lift up to remove ➃
6
Follow the steps in reverse to install the
replacement Hub
10
①
②
③
➃