Publicidad
Idiomas disponibles
Idiomas disponibles
A.
Insert Axle
Insert the axle (8) through the holes in the bottom of
the base assembly (6).
Art # A-12748
B.
Install Wheels on Axle
1. Attach a plain washer (11) to the axle.
2. Slide a wheel (9) over the axle followed by a washer
(11) as shown.
Art # A-12749
C.
Attach Wheels
1. Insert a cotter pin (10) through the hole in the axle
from the top down as shown.
2. Spread the cotter pin apart by using a pair of pliers.
3. Repeat steps B and C with the other wheel.
10
Art # A-12750
0-5368, Rev. AA
Firepower BASiC UTiLiTY CArT ASSeMBLY inSTrUCTionS
6
8
9
11
D.
Install Casters
1. Insert a caster (7) through the hole in the bottom of
the base assembly.
2. Fasten the caster using the caster nut (4) as shown.
3. Install the other caster following steps 1 and 2.
4
7
E.
Attach Handle Assembly
1. Attach handle assembly (2) to base assembly and
line up its 2 holes with the 2 holes in the base assembly.
2. Fasten the handle assembly using hooks (12) and
cotter pins (10) as shown.
3. Spread the cotter pin apart by using a pair of pliers.
10
12
Art # A-12752
3
Art # A-12751
2
December, 2014
Publicidad
