poolstar waterflex WR5-AIR Manual De Usuario página 16

Follow the instructions in this manual to assemble your product.
Do not get on the bike or pedal until you have finished assembling all the components.
To assemble your product, stand on a sufficiently large, flat and dry surface.
1
8
2
1
8
3
4
5
1
1
9
16 | EN
a
SSembly
Step 1 /
Install the wells (16) to the front foot tube (2) with bolts (17),
washers (18) and lock nuts (19).
Step 2 /
Install the front foot tube (2) onto the main frame (1), then
adjust it with knob (8).
Step 3 /
Install the back foot tube (3) onto the main frame (1), then ad-
just it with knob (8).
Step 4 /
Install handlebar support (4) and the saddle support (5) onto
the main frame (1), then adjust their position with the «Click-
and-turn» handle (9).
9
WARNING: To prevent injuries,
align the click-and-turn with
the frame. (See picture above)
2
1