Descargar Imprimir esta página

KSIX SIROCO BXVENT01 Manual página 8

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
1. ON/OFF button: Press
this button to turn on or
off the fan and
lighting.
2. Fan modes: Press this
button
to
between "Fresh mode"
and "Natural mode".
3. Air direction: Press this
button
to
between forward
backward
direction.
4. Music sync: Press this
button
to
lighting
rhythm of the music. It
features a total of 7
modes, press the button
to switch between them.
5. Speed levels: Press any
of the 6 buttons to set
your desired ventilation
speed.
6. Fan ON/OFF button:
Press this button to turn on or off the fan. Long press to set
the device on pairing mode.
7. CCT lighting ON/OFF: Press this button to turn on or off
the white lighting.
8. RGBIC lighting ON/OFF: Press this button to turn on or off
the colour lighting.
9. Brightness adjustment: Press this button to increase or
decrease the lighting brightness. Long press for the
brightness to increase and decrease automatically in a
continuous way.
10. RGBIC colour switch: Press this button to switch from one
colour to another.
11. White temperature adjustment: Press this button to
adjust the colour temperature. Long press for the white
shades to change automatically in a continuous way..
12. Dynamic RGBIC colour: Press this button to change the
dynamic RGBIC colour.
13. Music control: Press this button to play the previous or the
next song. Long press it to turn the volume op or down.
5. Warnings
• Please, strictly follow this user manual to install and use the
product to avoid accidents.
• Do not disrupt the product or modify any component.
• Turn off the power and the main electrical panel before
installing or doing maintenance tasks to avoid damage from
electric shock.
• Do not install the product on unstable or unsafe ceilings.
• Do not cover the product with blankets or similar objects.
• Do not handle any product component for installation,
repairing or checking unless you are a qualified electrician.
Wire connecting must follow IEE electric standard or any
other valid national standard.
• Do not install the product above hot or wet surfaces.
the
switch
switch
and
wind
make
the
follow
the

Publicidad

loading