Descargar Imprimir esta página

Costway NP11372 Instrucciones De Instalación Y Mantenimiento página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
7. Make sure your children know not to jump off a swing that is in
motion.
8. Teach children not to twist or loop the swing chains/ropes. This
may weaken the strength of the chain/rope.
9. Teach children to only use each swing in the proper manner it is
intended for. Children should learn to sit in the center of the swing,
with their full weight on the seat.
10. Instruct children not to push empty seats - the swing may hit
them on the rebound, and may cause serious injury.
11. All who use the swing set should dress appropriately e.g.
avoiding loose strings that could get caught in the swing chains.
12. Take care when using the swing after it has gotten wet, only
allow children on the swings when there is sufficient traction for
them to be safe.
13. No one should use the swing before you have checked that it is
assembled and anchored properly.
STRANGULATION HAZARD: Instruct children not to attach items
to the playground equipment that are not specifically designed for
use with the equipment, such as, but not limited to, jump ropes,
clothesline, pet leashes, cables and chain as they may cause a
strangulation hazard.
WARNING: Regularly check your tree branch, as well as the ropes
and swing itself. Look for splitting, fraying, missing bark, or other
damage, and repair right away. A properly installed swing should
not cause any damage or grooves in the tree. Replace rope every
couple of years.
08
WARNING: Never swing higher
than hook attach-ment
MAINTENANCE INSTRUCTIONS:
The frequency of inspection and maintenance will vary with the type of
equipment or materials used or other factors (e.g. heavy use, levels of
vandalism, coastal location, age of equipment.)
Carry out maintenance checks monthly or before the start of a usage
period, checking more regularly in seasons of high usage.
1. At the beginning of each play season:
1.1 Tighten all hardware
1.2 Lubricate all metallic moving parts per manufacturer's instructions.
1.3 Check all protective coverings on bolts, pipes, edges, and corners.
Replace if they are loose, cracked, or missing.
1.4 Check all moving parts including swing seats, ropes, cables, and
chains for wear, rust, or other dete rioration. Replace as needed.
1.5 Check metal parts for rust. If found, sand and repaint using a
nonlead-based paint meeting the requirements of 16 CFR 1303.
1.6 Reinstall any plastic parts, such as swing seats or any other items
that were removed for the cold season.
1.7 Rake and check depth of loose fifill protective surfacing materials
to prevent compaction and to maintain appropriate depth. Replace as
necessary.
WARNING: DO NOT walk in
front or behind swing while in
motion
09

Publicidad

loading