GRE LE75 Manual De Instrucciones página 4

EN
ASSEMBLY
A: Filter bag
A-1: Fine materialfilter bag
(optional, not with shipment)
B: Cleaner body
C: Charger
The cleaner is equipped with a spiral impeller, which rotates to drive the garbage in the water to be sucked into the ma-
chine and filtered out through a mesh bag to achieve cleaning purposes.
ASSEMBLY AND OPERATION
Charging warning
• Use only the original external adapter and the charging cable provided.
• Make sure the robot and charger ports are clean and dry before installation.
• Power up the robot before using it for the first time (about 3-4 hours)
1. Loosen the sealing cover on the top of the host in a counterclo-
ckwise direction to expose the charging port.
2. Insert the charger plug (with the slot aligned) into the charging
port on the host, and the indicator light on the charger will turn
red, indicating normal charging.
3. After about 3-4 hours, the indicator light of the charger changes
from red to green, indicating that the battery is fully charged. You
can unplug the charger from the host and rotate the sealing cover clockwise into the charging port, aligning the gap
to ensure that the charging port is sealed when the product is used in water.
ASSEMBLY OF THE CLEANER
Assembly and replacement of mesh bags:
1. Tear off the Velcro on the net bag, fix it on the net bag
fixing frame, and then attach the Velcro.
Note:
You can choose a small micro filter bag (optional bag).
2. Fasten the mesh bag fixing frame to the host,
as shown in the figure.
INSTRUCTION MANUAL
A-1
A
B
Switch
C
Charger Port