EGO PRO X CSX5000 Manual página 8

SPECIFICATIONS
EN
Rated Voltage
Max. Chain Speed
Chain Pitch
Chain Gauge
Guide Bar Length
Saw Chain Model
Saw Chain & Guide Bar Model
Chain Oil Tank Capacity
Weight (without battery pack,
saw chain, guide bar, side
cover, oil and chain sheath)
Recommended Operating
Temperature
Recommended Storage
Temperature
Recommended Charging
Temperature
Measured sound power
level L
WA
Sound pressure level at
working position L
PA
Guaranteed sound power level
L (according to 2000/14/EC)
WA
Front
handle
Vibration a
h
Rear
handle
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should
wear gloves and ear protectors in the actual conditions
of use.
8
56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CSX5000
PACKING LIST(FIG.A1)
DESCRIPTION
56V
KNOW YOUR CHAIN SAW (Fig. A1)
30 m/s
1. Saw Chain
8.255 mm / 0.325"
2. Chain-kickback Brake Paddle
1.3 mm
3. Front Handle
50 cm
4. LCD Screen
5. Speed Level
AC2035 (Recommend)
6. Bluetooth Icon
AC1635, AC1835
7. Headlight Icon
(Compatible)
8. Brake Icon
AK2035 (Recommend) 9. High-temperature Indicator
10. Fuel-gauge Circle
AK1635, AK1835
11. Load Current Level
(Compatible)
12. Low Oil Indicator
250 ml
13. Headlight/Bluetooth Button
14. Oil-feeding Button
15. Oil Output Level
4.3 kg
16. Lock-off Button
17. Trigger Switch
18. Rear Handle
-15°C-40°C
19. Chain Speed Shifter
20. Battery Release Button
-20°C-70°C
21. Oil-Inspection Window
22. Oil-Tank Cap
5°C-40°C
23. Guide Bar
24. Lubricating Hole
102 dB(A)
25. Chain-tensioning Bolt
26. Side Cover
K=2.3 dB(A)
27. Lock Nuts
92 dB(A)
28. Bucking Spikes
K=3 dB(A)
29. LED Headlight
30. Chain Sheath
104 dB(A)
31. Multi-wrench
ASSEMBLY
3.3 m/s 2
K=1.5 m/s
2
ASSEMBLING/REPLACING THE BAR AND CHAIN
1.74 m/s 2
K=1.5 m/s 2
in the braking position before assembly.
1. Position the chain saw power head on its side with the
2. Remove the side cover by turning the two lock nuts
3. Turn the chain-tensioning bolt counterclockwise to
4. Lay the saw chain in a loop on a flat surface and
WARNING:
Adjust the chain-kickback brake handle
side cover facing upwards (Fig. B).
counterclockwise.
loosen the chain tension.
straighten any kinks (Fig. C).