BTS Y1-4000D Manual De Usuario página 35

h. Water Supply -Float switch
a.Connect the Float wire to the terminal Ф@
( Brown wire-G), Black wire-(2))
b.Float down, pump start .Float up, pump stop
- 15 -
І. Water supply-Electric contact pressure gauge
Low start
-
lntell1gent Pump Controller
L.P
Mid
Н.Р
a.Connect the pressure gauge wire to the terminal
b.lndicator "Middle" -gauge not connected or wrong connection
c.lndicator" High" -please exchange the terminal wire
d.lndicator" Low" -please exchange the terminal wire (2) with Q)
lnstall the pressure gauge
at 3-5 meters from the
water outlet side
· Make high pressure little
higher than normal condition.
· Make Low pressure little
lower than normal condition
but higher than pressure
of по water.
Electric Contact f�;;:::;::;; �
Pressure Gauge
-
Pressure
tank
B uffer
bend
CD
(2) Q)
CD
with Q)
- 16 -