SCULPFUN SF-A9 Manual página 19

SF-A9 Machine User Manual
EN
8、Instructions for use
Thank you for purchasing our company's laser engraving machine. This equipment is a high-tech product that integrates light, machinery and electricity.
In order for you to better use and maintain this equipment, please read the user manual carefully and follow the steps in the user manual.
Important statement!
All losses caused by improper use or failure to follow the instructions in the user manual shall be borne by the
individual. The company has the final right to interpret this manual and has the right to modify all information, data,
technical details, etc. in this manual.
Safety Precautions
*Before operating the equipment, users must carefully read the user manual and strictly abide by the operating procedures.
*Laser processing may involve risks. Users should carefully consider whether the object being processed is suitable for laser operations.
*Processing objects and emissions should comply with local laws and regulations.
*This equipment uses a Class IV laser (strong laser radiation). This laser radiation may cause the following conditions:
① Ignite surrounding flammable materials;
②During the laser processing process, other radiation and toxic and harmful gases may be produced depending on the processing
objects;
③ Direct irradiation of laser radiation can cause human injury. The place of use must be equipped with fire-fighting equipment. It is
prohibited to stack flammable and explosive items around the workbench and equipment. At the same time, good ventilation must be
maintained.
*The environment where the equipment is located should be dry, free of pollution, vibration, strong electricity, strong magnetism and other
interference and influence. Working environment temperature 10-35°C, working environment humidity 5-95% (no condensation)
Notice!
1.After the laser is turned on, it is
strictly prohibited to aim it at humans,
animals, and flammable objects to avoid
skin burns and fires.
17
2.The brightness of the laser is
harmful to your eyes. Please
try not to look directly at the
laser.
3. Keep your hands away
from the machine when the
machine is working to avoid
injury.
4. Unplug the machine when not
in use to avoid misoperation by
third parties.