Publicidad
SAFETY SYMBOLS
EN
This product is in accordance with
applicable EC directives.
This product is in accordance with
applicable UK legislation.
SPECIFICATIONS
Dock Input /
56 V
Output Voltage
Compatible Hub
PGX1600E-H
Approximately
Charging Time
45 mins for 3 x BA2800T (5.0Ah)
100 mins for 3 x BA6720T (12.0Ah)
Recommended
Charging
5 – 40 °C
Temperature
Recommended
Storage
-20 – 70 °C
Temperature
Dock Weight
4.2 kg
RECOMMENDED ACCESSORIES
WARNING:
Use only identical replacement
parts listed below. Use of parts that do not meet the
original equipment specifications may lead to improper
performance and compromised safety.
PART NAME
PGX
E-Track Mounting Kit
TM
PGX
150 cm charging cable
TM
PGX
70 cm charging cable
TM
DESCRIPTION
KNOW YOUR DOCK (Fig. A)
1. Dock Status Indicator
2. Connector
3. Charging Cable
4. Battery-bay status Indicator (3)
5. Anti-theft Bar
6. Wall-mount Hole (5)
4
PGX
3-PORT DOCK—PGX3000D
TM
7. Assist Handle
8. Rubber Block (2)
9. Main Handle (2)
OPERATION
to only work with EGO PGX
charge EGO battery packs. Specified batteries please refer
to operator's manual included with the hub. Read and
understand all its safety warnings and instructions. Failure
to follow them may result in electric shock, fire, and/or
serious injury.
conditions. Water entering the dock will increase the risk
of electric shock.
away from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
which can make a connection from one terminal to
another. Shorting the terminals together may cause burns
or a fire.
CHARGING BATTERY PACKS
NOTE:
charged. Before using them for the first time, fully charge
the battery packs.
▪ Ensure that the power outlet fuse or circuit breaker is
rated for at least 10 Amps.
▪ Avoid using a power outlet with oxidized or damaged
pole pieces.
▪ During charging, the battery packs must be placed
in a well-ventilated area (for hubs for battery packs
MODEL NUMBER
that release gases into the atmosphere during normal
charging).
AEK1000
The following illustrations in Fig. B1 show how to
charge the battery packs via the docks:
ACE1500
1. Push the collar of the hub connector onto the dock
ACE0700
NOTE:
Fig. B2.
2. Connect the dock to the next dock in the same way
3. Plug the hub into the power supply (step 3). The
4. Align the raised ribs of a battery pack with the
WARNING:
This PGX
3-PORT DOCK is designed
TM
1600W HUB PGX1600E-H to
TM
WARNING:
Do not expose the dock to wet or damp
WARNING:
When the dock is not in use, keep it
Lithium-Ion battery packs are shipped partially
until you hear a click as shown in Fig. B1 (step 1).
Disconnect the hub from the dock as shown in
(step 2).
hub status indicator and dock status indicator will
glow green, indicating that the hub and the dock are
working properly and can charge the battery packs.
Original instructions
Publicidad
