Cleaning And Maintenance; Technical Specifications - HQ-Power VDP150MH7 Manual Del Usuario

Reverse Pan movement reverse. Press the jog wheel and turn it in an anti-clockwise direction. Press again
Pan Y to confirm.
Reverse Pan movement not reverse. Press the jog wheel and turn it in a clockwise direction. Press again to
Pan N confirm.
• Chase Speed
Chase To set the chase speed, press the jog wheel and turn it in a clockwise direction increase the value
Speed001 (faster) and in an anti-clockwise direction to decrease (slower). Press again to confirm.
• LED Indication
Yellow Power ON
Red No DMX signal (sound or auto mode is activated)
Green DMX signal is available

7. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections.
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts except for the lamp and the fuse.
8. Contact your dealer for spare parts if necessary.

8. Technical Specifications

Power Supply
Power Consumption
Fuse
Lamp
Dimensions
Total Weight
Max. Ambient Temperature
Max. Housing Temperature
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of
damage or injury resulted from (incorrect) use of this device.
For more info concerning this product, please visit our website www.hqpower.com.
The information in this manual is subject to change without prior notice.
VDP150MH7
max. 230VAC / 50Hz
max. 200W
3A, 250VAC (5 x 20mm) (order code FF3N)
150W HTI (order code LAMP150HTI (not incl.) or LAMPOSHTI
(OSRAM , not incl.))
®
410 x 520 x 370mm
13.4kg
45°C
130°C
7 HQPOWER