Publicidad
EN ISO 13849-1:2015
EN 62061:2005 + AC:2010
+ A1:2013 + A2:2015
IEC 61508 Parts 1 - 7:2010
7.
Signed for and on behalf of:
Person authorised to complete the technical file:
DoC authorised by:
Date:
IMPORTANT NOTICE
T
hese electronic drive products are intended to be used with appropriate motors, controllers, electrical
protection components and other equipment to form complete end products or systems. It is the
responsibility of the installer to ensure that the design of the complete machine, including its safety-related
control system, is carried out in accordance with the requirements of the Machinery Directive and any
other relevant legislation. The use of a safety-related drive in itself does not ensure the safety of the
machine. Compliance with safety and EMC regulations depends upon installing and configuring drives
correctly, including using the specified input filters. The drive must be installed only by professional
installers who are familiar with requirements for safety and EMC. The assembler is responsible for
ensuring that the end product or system complies with all relevant laws in the country where it is to be
used. For more information regarding Safe Torque Off, refer to the Product Documentation.
1-000-044-252 Rev 00.04
Safety of Machinery, Safety-related parts of control systems, General principles
for design
Safety of machinery, Functional safety of safety related electrical, electronic
and programmable electronic control systems
Functional safety of electrical/ electronic/programmable electronic safety-
related systems
Authorised representative (see details above)
Jon Holman-White, Vice President, Research and
Development.
th
13
November 2023, Newtown, Powys, UK
3
Publicidad
