Publicidad
Idiomas disponibles
Idiomas disponibles
Install App on Smart Device
To install the JB GO V2 or measureQuick
QR code (right) or search the App Store/Google Play for JB GO.
The JB GO V2 App from JB Industries is designed to make working
with JB wireless and digital products accurate, fast and efficient.
JB wireless and digital products have been designed to help
technicians and contractors get accurate readouts while on-site.
OPERATING INSTRUCTIONS
Installing Batteries
Power Probe On/Off
1. Press and hold POWER button to turn on
2. Press and hold POWER button to turn off
Navigating the Menu
1. Press and hold ENTER button to enter the menu
2. Press POWER button to cycle through the options
3. Press ENTER button to select the highlighted option
Screen Icons/Definitions
Retrieving the Version/Revision/Lot #, Serial #
1. Press and hold POWER button to turn on
2. Read the information displayed on the screen
(Displayed at start-up for approximately 4 seconds)
Assigning the Probe Identifier
("P" number)
P1 should be used for Low Side
P2 should be used for the High Side
1. Press and hold ENTER button to enter the menu
2. Press POWER button to cycle to "Pressure #"
3. Press ENTER button
4. Cycle through the numbers and press ENTER button
when the desired number is highlighted
5. The Probe will restart and the new Probe identifier number will be used
app, scan the
®
JB INDUSTRIES • Wireless Pressure Probes • 630.851.9444 • sales@jbind.com
Look for JB GO V2 or measureQuick
in your app store
Battery Door
B l u e t o o t h
Unit ID
Connection
Battery
Indicator
®
OLED Screen
Power Button
Enter Button
Colored Band
Battery Door
Locking Tab
P r e s s u r e
Unit
3
Publicidad
