Publicidad
STEP 11
With the assistance of another person, locate and mark the studs in the wall that the cabinet will be
mounted to. Mark the location of the of the studs with a pencil. Position the wall hanger (K) on the
wall and mark the locations of the studs on the wall hanger. Drill four 3/16" diameter holes in the wall
hanger (K) at the stud locations. Using a level, attach the wall hanger (K) to the wall with four screws
(8) as shown. It is important that the wall hanger is mounted to a minimum of at least two studs.
With the help of another person, place the assembled component onto the wall hanger (K) so the two
beveled edges on the back rail (I) and wall hanger (K) mate together.
I
Wall to be
mounted to.
K
systembuild.com
8
(x4)
K
8
8
18
8
8
D
You
Tube
Publicidad
