Publicidad
Idiomas disponibles
Idiomas disponibles
Using the Clamp on a System
1. Press and hold POWER button to turn on the clamp
2. Secure the clamp to the copper line in the proper area where the temperature is to
be measured
Using the Clamp with iOS/Android App
1. Visit the Apple Store/Play Store on your device
2. Search for JB GO V2 or measureQuick
3. Once app is installed, tap on app to open
4. Turn on clamp
5. Tap on Toolbox Icon in the lower right screen
6. All powered on wireless tools will be displayed
7. Tap on the device you want to map to the app based on the tool' s serial number
8. Tap "Map to Liquid Line" or "Map to Suction Line" depending on where you're
using the clamp
9. Continue mapping additional tools in the same manner
Using the Clamp with the JB Industries
DM4-W Digital Manifolds
Mechanical information
• The JB Industries DM4-W Digital manifold will work with 2 temperature clamps
(wired or wireless)
• Wired K-Type clamps are prioritized if they are plugged into the DM4-W
• The wireless clamps can be used in-place of the wired K-Type clamps
JB INDUSTRIES • Wireless Temperature Clamps Operating Manual • 630.851.9444 • sales@jbind.com
6
and install the app
®
Publicidad
