Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
Thank you for purchasing the CLIMATE CLASS Wireless Vacuum Gauge by JB
Industries. This device is capable of accurately measuring the vacuum in evacuated
systems commonly found in the HVACR industry. These gauges can display the vacuum
readings on an easy-to-view OLED screen. It can also wirelessly send information to an
IOS smart device, or an Android smart device through the JB GO V2 App.
Specifications
Pressure Range
Accuracy
Resolution
Sensor Type
Pressure Units
Female Flare Size
Power Supply
Bluetooth
Range
®
Battery Life
Storage Temperature
Display
Unit Weight
Compatibility
IP Rating
Battery Life Indicator
Warranty
General Safety
Use caution when taking vacuum measurements. Pipes, tubes, and other components
of HVACR equipment can be very hot (or very cold) as well as being highly pressurized.
Skin and eyes can easily be injured if components are handled without care. Use
adequate personal protective equipment when servicing these systems. Check that the
system is not pressurized before attaching the vacuum gauge product to a system, as
pressures excess of atmospheric pressure can damage the internal sensor.
JB INDUSTRIES • Wireless Vacuum Gauge Operating Manual • 630.851.9444 • sales@jbind.com
2
Atmospheric Pressure -10 Microns
±1 Micron
1 Micron
MEMS technologies, Stainless Steel structure
Micron, pascal, psia, InHg, torr, mTorr, mBarr
¼" SAE Flare
2 x AA batteries (included)
Up to 350ft (106m) - Dependent on environment
approximately 136 hours
+14°F to 140°F (-10°C to +60°C)
OLED
8.5 oz
Min iOS Version: 11.0+, Min Android Version: 7.0+
IP54
Yes
1 year
Publicidad
