Descargar Imprimir esta página

VEVOR XLS-215WG Manual Del Usuario página 11

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73
allowed. When installing, the universal wheels should be padded well. So
as to make the showcase be level and stable, or it will cause vibration and
too much noise.
3.When initial operation, the refrigerator should run emptily about one hour
before storing food in it.
4.The evaporator fans run continuously during the refrigeration cycles to
maintain the factory set internal temperature range.
5.How to use the temperature control: the thermostat could adjust the
temperature inside the showcase. When you turn the knob in clockwise.
The bigger the figure, the lower the temperature. Generally, the position of
'5' is suitable.'OFF' position stands for no cooling.'Max' position stands for
maximum cooling. The temperature will vary depending on the quantity of
the food and drinks stored and on the frequency with which the door is
opened.
6.Light switch location varies by XLS model. Most models have the light
switch located on the right side of the top light box.
7.To save energy, the door should not be frequently opened or left open for
a long time.
8.Refrigerators with mechanical temperature controls will defrost during
every compressor off-cycle.
Wiring Diagrams
- 10 -

Publicidad

loading

Este manual también es adecuado para:

Xls-295wgXls-365wgXls-450wg