LF allen + roth TPPER2401A Instrucciones De Montaje página 15

ASSEMBLY INSTRUCTIONS
14. Insert the Pulley (O1) into the Track Beam (E).
Insert the Connector
and connect them with Bolt (AA) and
(GG). Insert the Track Beam Shield (N3) into the
Track Beam (E). Connect the Track Beam (E) and
Track Beam Shield (N3) to the
Plastic Washer
Bolt (AA) and
with the Wrench (NN). Place
Bolt (AA).
Hardware Used
AA
GG
II
NN
15. Insert the Pulley (O2) into the Track Beam (E).
Insert the Connector (G3) into the Track Beam (E)
and connect them with Bolt (AA) and
(GG). Insert the Track Beam Shield (N3) into the
Track Beam (E). Connect the Track Beam (E) and
Track Beam Shield (N3) to the
Plastic Washer
Bolt (AA) and
with the Wrench (NN). Place
Hardware Used
AA
GG
II
NN
(G3) into the Track Beam (E)
Plastic Washer
Connector
(GG). Tighten together
Cap (II) on the
Plastic Washer
(G3) with
Connector
(GG). Tighten together
Cap (II) on the Bolt (AA).
14
O1
(G3) with
O1
E
E
15
O2
E
E
15
E
E G3
O1
II
AA
G3 N3
GG
II
AA
GG
N3
E
E G3
O2
II
AA
G3 N3
GG
II
AA
GG
N3
E
N3 E
E
E
E
N3 E
E
E