Sylvania LC195SL9 C Manual Del Usuario página 16

W
ATCHING TV
Screen Information
You can display the currently selected channel or other information such as
the audio mode on the TV screen.
TV
In the analog mode, the current channel number and the audio mode are
displayed.
Press [INFO].
• The current channel number, audio mode, type of
resolutions for video signal, TV aspect ratio, CC and
TV program rating are displayed on the top-right
corner of the TV screen.
• To clear the display, press [INFO] again. You can also
press [BACK].
•
•
DTV
In the digital mode, the detailed broadcasting information for the current
channel such as program title, program guides are displayed.
• Press [INFO] to display the details of the currently
selected program.
Broadcasting information
The following information is displayed.
1
A Day of Memories A Day of Memories
A quarter-century ago,which may now qualify as the
good old days of newspapering,run-of-paper sales
accounted for 80 percent of the industry's advertising
revenues.Department stores and supermarket were
3
1 program title
2 broadcast station
3 program guide (The program guide added
to broadcasting information is displayed to a
maximum of 4 lines.)
4 channel number
5 audio language
(Refer to "Switching Audio Mode" on page 15.)
6 effective scanning lines and scan mode
7 digital TV format
8 program aspect ratio
9 V-chip rating
10 CC (not available if CC is set to "Off")
Note:
• When the program guide consists of more than 4 lines, use
[Cursor K/ L] to scroll.
• "No description provided." is displayed when the program
guide is not provided.
• While the program guide is displayed, the closed caption
function is interrupted.
• In external input mode, the following screen is displayed;
e.g.) When an external device is connected to VIDEO1 input
jack.
• The information display will automatically disappear in
1 minute.
16
EN
6
SAP / STEREO
480i SD 4:3
480i SD 4:3
CC
TV-PG DLSV CC
2 4
KABC KABC
6-1
5
English 1/2
1080i 1080i HD HD 16:9 16:9
CC
TV-PG DLSV CC
6, 7, 8
9 10
Video1
480i SD
480i SD
TV-PG DLSV CC CC
TV Screen Display Mode
3-5 types of display modes can be selected when the unit receives 4:3 / 16:9
video signal or PC input signal.
Press [SCREEN MODE
aspect ratio.
For 4:3 video signal
Sidebar
Full
Sidebar
Select to display a 4:3 picture at its original size.
The black bars appear on the left and right sides of the
screen.
Full
Select to display a 4:3 picture to fill the screen.
Cinema
Select to reduce the black bars on top and bottom.
Wide
Digital mode:
Select to display a 4:3 picture to fill the screen and
shrink "FULL" picture horizontally.
Analog / external input mode:
Select to display a 4:3 picture to fill the screen and
stretch "FULL" picture horizontally.
] repeatedly to switch the TV
Wide
(digital mode)
Wide
(analog /
external input mode)
Cinema