Publicidad
Idiomas disponibles
Idiomas disponibles
USER MANUAL
4. 110007
1. Dispenser Tray - For warming composite
inside of dispenser to 155°F (68°C).
2. Syringe Tray - for warming the
syringed material to 155°F (68°C).
3. MultiPRO Tray - Flexible configuration.
Warms to 155°F (68°C), 130°F (54°C), or
98°F (37°C), 3 dispensers, 4 compules,
syringes and/or finishing instruments.
4. Standard Tray – For warming 8
composite complules to 155°F (68°C).
!
DISINFECTION INSTRUCTION FOR DISPENSER TRAY
To clean, remove the plastic sleeve and top. The sleeve and the top can be
cold sterilized. The metal tray can be autoclaved or cold sterilized. A Q-tip with
disinfectant can be used to clean out the middle of the tray.
!
DO NOT AUTOCLAVE THE BOTTOM HEATER UNIT.
4
1. 110007-02
5. 600059
5. Anesthetic Carpule Tray - For warming
anesthetic compules to 98°F (37°C).
6. Porcelain Veneer Tray - for warming the
composite in the back side of the veneer
to 155°F (68°C). Keep lid on
for 3 minutes of warming.
7. Restoration Tray - For warming all
adhesively bonded restorations.
2. 110040
3. 110007-64
6. 600066
7. 600044
Publicidad
