Publicidad
Idiomas disponibles
Idiomas disponibles
EXPLANATION OF THE OVEN AND CONTROL PANEL
Insert the plug into a grounded socket. Set the timer to manual or automatic
cooking. Adjust the thermostat to the appropriate temperature value accor-
ding to the values in the cooking table. When the timer is set to the desired
time, you will hear a warning sound at the end of cooking and cooking will end.
minutes, first of all, the timerbutton should be turned 90 degrees and then it
should be brought to thedesired time.
A. Function
Allows you to select the oven functions. The functions are
explained in thenext section. Along with the function selec-
tor button, you need to set theoven thermostat button to a
temperature value you have chosen. Otherwise,the function
button you selected will not work.
B. Timer
Allows you to set the cooking time. When the time you set
expires, the timerwill cut off the electricity of the heaters and
cooking zone and give a warning with a ringing sound. To
turn off your device, set the timer, program and thermostat
button to '0'. If it is desired to set the timer in less than 10
C. Temperature setting
It provides the temperature range in the oven. It is used with the
ovenprogrammer control button. When the temperature inside
your ovenreaches the value you set, the thermostat switches
off and the thermostatlight turns off. When the temperature
drops below the set value, thethermostat is activated again.
INGLÉS
25
Publicidad
