Publicidad
Idiomas disponibles
Idiomas disponibles
IM200
COMPREHENSIVE
MANUAL
TECHNICAL SPECIFICATIONS
FREQUENCY
800/1800 MHZ / QUADBAND
DISPLAY
TFT 1.77" COLOR
< _ 100dB
SPEAKER
+ _ 375/240 HRS.
STANDBY TIME
+ _ 3/5 HRS.
TALK TIME
CALL RECORDS
20
< _ 16GB
MEMORY CARD COMPATIBILITY
CONTACTS
100
SMS ARCHIVE
50
CHARGER
100-240V~50/60 Hz 150mA 5.2V
BATTERIE
Li-ION 3.7V 700mAH
WARNING
The power adaptor allows you to disconnect the device. The power source
should be close to the device and easy to access. Switch off the handset where
mobile use is prohibited or when it may cause disturbance or danger.
Never use the telephone while driving. Switch off on aeroplanes, in hospitals or
near medical equipment, in petrol stations and other areas near explosive goods.
Do not use batteries of different capacity to the original batteries,
do not immerse the handset or any of its components in water and do not
expose them to fire or extreme temperatures. Waste material generated when
the device and its components are discarded should be treated in accordance
with regulations in force and not like normal waste. When you wish to discard
the handset or its components, take them to your nearest electrical/electronic
waste management centre.
DIAGRAM
1
2
3
4
5
6
10
7
TFT Screen
Mute/General mode/Select text
1
7
input mode
Direct memory 1
2
8
SOS Button
Direct memory 2
3
9
Torch ON/OFF
Call/Pick up
4
10
Unlock
Reject / Hang up
5
Keypad
6
ICONS AND FUNCTIONS
DIRECT MEMORY 1
DIRECT MEMORY 2
CALL/ACCEPT
HANG UP/REJECT CALL
SOS BUTTON
LOCK/UNLOCK
SILENT MODE
BROWSE/UP: READ MESSAGES
BELOW: ALARM SETUP
SWITCH OFF/ON THE TORCH
SIGNAL STRENGTH
MISSED CALLS
500mA
INSTALACIÓN
IMPORTANT: Switch off the handset and disconnect the charger before
removing the battery cover.
INSTALLING THE FLASH MEMORY CARD: Take off the back cover of the IM200
and remove the battery. Insert the memory card in the slot underneath
the SIM card compartment and ensure that the metal contacts on the card are
facing downwards. Please take care not to scratch or bend the metal contacts on
the card.
The Flash memory card is used as storage for the telephone. You can copy files
onto the card when you connect to a computer via USB.
Take off the back cover of the IM200 and remove the battery.
INSTALLING THE SIM CARD: Insert the SIM card in to the SIM card
compartment above the memory card slot (ensure that the side of the card
containing the metal contacts
is facing inwards).
Switch off the mobile before removing the SIM card. *Use of MicroSIM cards
with an adaptor is not recommended.
INSERTING THE BATTERY: Remove the battery cover, insert the battery into the
battery compartment and replace the cover.
The first time you use the handset please drain the battery completely and then
charge it for 4 hours to optimise battery life.
8
CONTACTS
When you press the Menu key, the first option you will see is CONTACTS.
1.SEARCH
Under this option, once you have saved contacts, press SEARCH to quickly
locate a contact using the first letter of their name.
2.ADD NEW CONTACT
You can add a new contact to the SIM (card) or the handset and press Accept
9
to confirm.
1.Insert contact name and number.
2.Where you choose to save the contact on the telephone, you will also be able
to assign an image and ringtone to that contact. The image can be taken from a
file or from the camera itself. To select the image location
use the * and # keys to scroll to the right and left.
Select the desired location and press Option to choose.
3.You can keep the default ringtone or choose a new one. The ringtone can be
selected from a file or from pre-set handset ringtones. Use the * and # keys to
scroll right and left respectively to select the location of the Ringtone. Select the
desired location and press Option to choose
4. Press Option to save.
3.CONTACT PHOTO
NAME: Insert name
NUMBER: Insert number
SOUND AND VIBRATE
CALLER PHOTO: Press Option, then Select image source (Default, camera or
SILENT MODE
file) and assign a photo to the contact. The photo will appear every time you
make a call to or receive a call from
SOUND ONLY
that contact.
*Use a 240x320 pixel image to optimise display.
VIBRATE
RINGTONE: Press Option, then Select the ringtone and then select
HEADPHONES CONNECTED
OK to assign the ringtone to the contact.
LOCKED
Press Option and scroll to Save, then press Select to save changes.
UNLOCKED
4.CONTACT SETTINGS
FAVORITES : Choose whether new contacts will be saved by default on the SIM
card, on the mobile handset or in the location specified each time a new contact
ALARM ON
is added (both).
BATTERY LEVEL
STORAGE : Allows you to check how many contacts are saved on the SIM card
and on the handset.
NEW SMS
MEMORY CARD
COPY CONTACTS: Copies contacts to the SIM card or to the handset. MOVE
DETECTED
CONTACTS: Moves contacts to the SIM card or to the handset.
DELETE ALL: Deletes all contacts from the SIM card or the handset.
SETTINGS
Press Menu and scroll to SETTINGS
1.SOS
STATUS: You can select the status (on/off). The status must be "on" to work
properly.
SOS NUMBER: Set up the numbers that the SOS button will dial when pressed.
These calls will be made in the order in which the telephone numbers are
inserted.
SOS STATUS: Set up the status of the SOS message (activated or deactivated),
to be sent to the pre-inserted numbers.
SOS SMS: Insert the text of the SMS to be sent to the pre-inserted numbers.
If the function is on, when you press the SOS button on the back of the device, the
telephone will emit an emergency tone and will call the five pre-saved numbers.
Warning!
The SOS function must be activated prior to use. Occasionally interference
from other sources (Internet, environment etc.) may mean that the SOS
function is not available.
2.TELEPHONE
DATE AND TIME: Select the Time Zone, Date and Time and the Format in which
you would like date and time to be displayed. You can also choose whether you
would like the time to update automatically with the time zone.
LANGUAGE: Press Accept and use the up/down keys to select the language you
want.
DEFAULT INPUT METHOD: Press Accept and uses the up/down keys to select
the default text input method.
SCREEN: In this menu you can change the system wallpaper and personalise it.
3.PROFILES
Scroll to select available modes General/Silent/Conference/Outside.
After selecting the mode, you can personalise each one by selecting Option:
· Alert type (sound only, vibrate only or vibrate and ring)
· Type of ringtone (Repeat, ascending, beep once)
· Incoming call (ringtone)
· Ringtone volume
· SMS vol.
· Audible keyboard (Silent, Clicking, Sound, Human voice)
· Volume Key
· Ringtone On
· Ringtone Off
· System Alert (On/Off)
Pressing the # key, changes the mode to Meeting.
4.SPEED DIAL
M1/M2 KEY: Allows you to call pre-assigned contacts by pressing M1 and M2.
Status: The default status is ON. Press Accept to change it.
Number: Press Accept to input the numbers M1 and M2.
KEYS 2-9: You can set the status (on/off) and assign a contact to each number
(from 2 to 9). Once you've done this, when you dial these numbers, the phone
will call the relevant assigned contact.
Status: The default status is OFF. Press Accept to change it.
Number: Press Edit to select to the contact from the list of Contacts and press
Accept to confirm.
5. LOCK MODE
Scroll to choose the feature that you want to disable and press Accept.
The disabled feature will disappear from the main menu.
6.CHANGE PRESET KEY SETTINGS
UPPER KEY: The upper key is by default for the Messages menu. It can be
changed to cover Contacts, Calls, Calendar, Camera, Multimedia, Contact
Photo, FM Radio or Bluetooth.
LOWER KEY: The lower key is by default for the Contact Photo menu. It can be
changed to cover Contacts, Calls, Calendar, Camera, Multimedia, Messages,
FM Radio or Bluetooth.
7.NETWORK
NETWORK SELECTION: You can look for and select a network manually, as well
as changing the network selection method (automatic/manual).
8. SECURITY
SIM SECURITY: You can use this menu to ACTIVATE/DEACTIVATE the Pin Lock
and change the PIN code.
TELEPHONE SECURITY: You can use this menu to ACTIVATE/DEACTIVATE the
handset lock and change the passcode. The default passcode for the handset is
"0000".
AUTO-LOCK: Allows you to choose the amount of time that elapses before the
handset locks automatically.
9. RESTORE DEFAULT SETTINGS
Restores factory settings on the handset. The default passcode for the handset
is "0000".
MULTIMEDIA
Press Menu and scroll to MULTIMEDIA.
1. FM RADIO
Use the up/down arrows to select to the channel and the */# keys to adjust the
volume.
Press the Hang up key to return to sleep mode. The radio will stay on.
Press 0 to switch the FM radio on/off.
Pressing Option allows you to Edit the radio stations (Name and frequency),
and Save them, or press Dial to input a frequency manually. You can also do an
Auto-Search and save the frequencies
to listen to them later.
2. CAMERA
Press the 0+ key to take a photo.
To view photos press Option and select Photos.
Pressing Option also allows you to Change the camera settings (Shutter release
sound, EV, contrast, anti-blink mode, timer, continuous shooting), Change
image settings (size and quality), white balance, scene mode, camera effects,
storage (SIM Card or telephone) or Restore default settings.
Warning! If the capacity of the memory card is insufficient, delete a document
or increase memory card capacity.
3. SOUND RECORDER
*You need to insert a memory card in the handset before using this function.
a)To start a new voice recording press Option and select "new recording", in the
Menu/Multimedia/Recording section
b) Press "stop" to stop and save the recording.
c)If you wish to cancel a recording without saving it, press the M2 button.
To listen to recordings, go to Menu/Multimedia/File manager and select the
3
Publicidad
