Inferno LCD1510 Instrucciones De Uso página 3

8) To reduce risk of electric shock, unplug charger from outlet
before attempting any maintenance or cleaning.
9) Operate with caution if the charger has received direct hit of force or
been dropped. Have it checked and repaired if damaged.
10) Any repair must be carried out by the manufacturer or an
authorized repair agent in order to avoid danger.
ABOUT THE BATTERY CHARGER
1) The LCD1510 is designed for charging 12V/24V
lead-acid and 12V lithium-ion batteries (LiFePO4).
2) Built-in intelligent microprocessor makes charging faster, easier and safer.
3) This charger has safety features, including spark proof, protection for
reverse polarity, short circuit, overheat and overcharge.
4) When starting, the battery voltage type is 12V by default. The user can select
battery voltage type by pressing "12V/24V" button in standby.
5) When starting, the charger works for STD battery type by default. The user can
select battery type include STD, COLD/AGM, CAL, LiFePO4(only for 12V battery) by
pressing and holding "FUNCTION/TYPE" button for 3 seconds in standby.
6) When the charger is powered on, it enters the standby mode by default.
The user can select functions including CHARGE, SUPPLY, REPAIR, BOOST by pressing
"FUNCTION/TYPE" button in standby. And press "ON/OFF" button to start.
TECHNICAL SPECIFICATIONS
AC-input:
DC-output:
Efficiency:
Charger Type:
Battery Type:
Housing Protection:
Ambient Temperature:
Accessories Included:
220–240 V AC, 50–60 Hz, 400 W
12V DC, 15A; 24V DC, 7.5A; Temperature Controlled.
85 % Approx
8 steps, Full-automatic Charging Cycle
All Types of 12V and 24V Lead-acid Batteries
IP33
0 °C ~ +40 °C
Battery Clamps
// USER GUIDE_EN 3