NUTRICHEF NCNTROCB10 Manual Del Usuario

USER MANUAL
NCNTROCB10
64 Oz. Nitro Cold Brew Coffee Maker
Pressure Relieving Valve & Stout Creamer Faucet
UNIT OPERATION INSTRUCTION
1. Stainless Steel Mini Keg 64oz
2. Stainless Steel Stout Faucet
3. Black Plastic Tap Handle
4. Stainless Steel Spear
with Pressure Relieving Valve 75PSI
5. Stainless Steel N2O or N2 Cartridge Holder
6. SS Wrench
7. Keg Cleaning Brush
8. Faucet Brush
9. Silicone Hose
PART ONE: SPEAR ASSEMBLY
1. Please clean mini keg, cap, spear body, faucet and
www.NutriChefKitchen.com
NOTE:
•
experience, maybe 20:1, 15:1 or others.
• Total liquid volume is 60%-75% of keg capacity.
Please keep in mind that you need to leave enough
space in the keg to inject the gas cartridge into.
3.
into Spear, make Sure hose can touch bottom of keg
without overlong or overshort.
Remark:
completely. But if hose is too long, it may crimp inside the
keg, also caused by incomplete tapping.
4. Install Faucet into Spear Body, make sure the
connection is proper and tight.
Remark: Improper combination would cause leakage of
5. Place nonthread N2 or N2O cartridge into SS cartridge
holder, connect the whole part to the gas in connection
of Spear, hear 'Whistle' sound of nitrogen injection.
then put it to refrigerator for 1 hours at least.
7. Take whole setup from fridge, place the glass to the
nozzle and then pull the handle to the front slowly,