Publicidad
Idiomas disponibles
Idiomas disponibles
Smartphone Setup
1. Download the Connected Family App. Ensure that your smartphone
is connected to your home's Wi-Fi network.
2. To use the USB cable with attached adapter: Plug adapter into a wall
outlet then insert the USB-C end into the back of the baby monitor.
3. The monitor head will rotate to calibrate. The status LED will turn red,
then blue. To enter pairing mode, insert reset pin to monitor pairing
button
and hold for 5 seconds until you hear a chime. When the
d
status LED is blinking red, the device is in pairing mode.
4. In the app, tap
, then select See Pro Baby Monitor to begin
pairing your device.
5. Follow step-by-step instructions to complete pairing.
6. Once successfully paired, the status LED will turn solid blue.
7. In the Connected Family App, Tap
wall mount your product. You can also enable CryAssist, share access,
configure notifications, adjust the status LED and more.
Wi-Fi Connectivity for Smartphones
Connecting to this baby monitor via your smartphone requires a 2.4 GHz, 5.0
GHz, or dual-band home network. Certain shared networks such as those in
hotels may not function. We recommend a connection with network speeds
of 2 Mbps or greater at the location the device will be installed. Your internet
service provider can verify the quality of your internet connection.
4
to learn more, including how to
Parent Display Setup
Power on the baby monitor and the parent display, and they will
automatically connect. If the connection fails, please follow the steps
below to pair. Pairing must be completed at close range. Ensure that the
baby monitor and parent display are no more than 500' (200m) apart
during pairing.
Pairing your baby monitor and parent display:
1. Press the Menu button on the parent display, and select > Baby Monitor.
2. Select Baby Monitor 1 or Baby Monitor 2 to pair.
3. Press and hold the baby monitor pairing button until you hear the chime.
4. Press the
button on the parent display screen to start pairing.
5. (Optional) For Baby Monitor 2, repeat Step 2–Step 4 above.
Unpairing your baby monitor and parent display:
1. Press Menu button on the parent display, and select > Baby Monitor.
2. Select Baby Monitor 1 or Baby Monitor 2 to unpair.
3. Press and hold the
button to unpair the devices.
Note: CryAssist requires an internet connection and must be setup
in app.
5
Publicidad
