MOB MO9273 Manual De Uso página 5

Example: CENTER,000000,123456789#
※ Using your mobile phone, send the above command to the phone number of the device, it will reply: Center OK!
※ To delete this number, you can send :CENTER,000000,0# to the phone number of the device.
2. GPRS Setting
In order to use the GPRS function, the user needs to setup the APN by sending an SMS command.
What is APN? Access Point name (APN) is the name used to identify a general packet radio service
(GPRS) bearer service in the GSM mobile network. The APN defines the type of service that is provided in
the packet data connection.
※ Make sure that the SIM card in the tracker supports the GPRS function.
※ The APN can be acquired from your local GSM operators.
Command: APN, APN information, user name, password#
Note: Some APN are without user name and password, so please leave it blank.
For example: APN, internet, 123,456# (with the user name and password
APN, internet# (without the user name and password)
※ please set it up when the device cannot connect with the web platform or the APP.
※ After sending the command, it will reply: APN OK!
3. Location request
Reply with coordinates and web link
Command:URL#
The device will reply: the map link, the longitude and latitude
Example: http://maps.google.com/maps?q=N22.669534,E114.011888
※ Click on the link then the location can be shown directly on Google Map on your mobile phone.
4. Vibration Alarm
Command: VA, ON# (turn on this function)
VA, OFF# (turn off this function)
※ Please move the device after 5minutes,then you will get a message reply: vibration alarm, please note!
※ This function is off by default setting.
※ After sending the command, it will reply: VA OK!
5. Over-Speed Alert
Command: OS, 80# (80 is the set-up speed)
OS, OFF# (turn off this function)
※ This is to turn on/off the over-speed alarm, speed unit:km/h
※ Speed range:30-180km
※ This function is off by default setting.
※ After sending the command, it will reply: OS OK!
6. Listen-in (Voice Monitoring)
Command: JT# (turn on the function)
JT0# (turn off the function)
※ Please call the mobile number in the device, then you can hear what is happening around the tracker after you get
the SMS reply when turning on this function.
7. SOS Alarm
Command: SK, 1# (Alarm on)
Command: SK, 0# (Alarm off)
※ Press the SOS button for 3 seconds, it will call the authorized number.
)