Publicidad
Attention
Not permitted on aircraft.
IMPORTANT SAFETY INSTRUCTIONS
WARNING - When using this product, basic precautions should always be followed, including the following:
Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary when the product is used near children.
• Do not put fingers or hands into the product.
• Do not expose the product to rain or snow.
•
Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk
of fire or injury to persons.
To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the
product.
• Do not use the product in excess of its output rating. Overload outputs above rating may result in a risk of fire
or injury to persons.
•
Do not use the product that is damaged or modified. Damaged or modified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury.
Do not operate the product with a damaged cord or plug, or a damaged output cable.
• Do not disassemble the product. Take it to a qualified service person when service or repair is required.
Incorrect reassembly may result in a risk of fire or electric shock.
•
Do not expose to fire or high temperatures. Exposure to fire or temperatures above 130°C may cause explosion.
To reduce the risk of electric shock, unplug the power pack form the outlet before attempting any instructed
servicing.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure
that the safety of the product is maintained.
• When charging a device, the product may feel warm, this is a normal operating condition and should not be
cause for concern.
When charging the internal battery, work in a well ventilated area and do not restrict ventilation in any way.
• Do not clean the product with harmful chemicals or detergents.
• Misuse, dropping or excessive force may cause product damage.
• When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems
separate from each other.
CAUTION: Risk of explosion if the battery is replaced by an incorrect one.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an
explosion;
• Leaving a battery in an extremely high temperature environment can result in an explosion or leakage of
flammable liquid or gas;
• A battery subjected to extremely low air pressure may cause an explosion or leakage of flammable liquid or
gas;
• Unplug the AC power cable to disconnect from line voltage.
WARNING: GROUNDING INSTRUCTIONS
This product must be grounded. In the event of malfunction or breakdown, grounding provides a path of least
resistance for electrical current to reduce the risk of electric shock. This product is equipped with a cord having
an equipment grounding conductor and a grounding plug. The plug must be plugged into an outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
WARNING – Improper connection of the equipment grounding conductor may result in an electric shock. Check
with a qualified electrician if you are in doubt as to whether the product is properly grounded. Do not modify
the plug provided with the product – if it does not fit the outlet, have a proper outlet installed by a qualified
electrician.
19 AU
Storage and Maintenance instructions
1. Store the product between 32°F-104°F (0°C-40°C). Avoid exposing the product to rain or using the product in
a humid environment.
2. To preserve the battery lifespan, charge to 100% after using. If you plan to store your power station, recharge
to 100% every 3 months.
3. Keep the product on a flat surface when using, charging, and storing.
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance with Radio Equipment Regulations
2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012. The full text of the GB Declaration of Conformity is available at the following
website:
https://www.anker.com.
Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, HongKong
The following importer is the responsible party（contract for EU and UK matters）
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Limited,
GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
Bluetooth:
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and
any use of such marks by Anker Innovations Limited is under license.Other trademarks and trade names are
those of their respective owners.
Declaration of Conformity
This product complies with the radio interference requirements of the European Community. Hereby, Anker
Innovations Limited declares that the radio equipment is in compliance with Directive 2014/53/EU& 2011/65/
EU and amendment (EU) 2015/863. The full text of the EU Declaration of Conformity is available at the following
website: https://www.anker.com
Maximum output power:19 dBm (For EU)
Frequency band: 2.4G band (2.402GHz - 2.480GHz)
Directive 2014/53/EU radiation exposure statement
This equipment should be installed and operated with minimum distance 20cm between the radiator and your
body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over
to the applicable collection point for the recycling of electrical and electronic equipment.
Disclaimer
The Uninterruptible Power Supply (UPS) function is designed and manufactured for use in OA equipment such
as PCs.
Do not use UPS in situations or with equipment that requires extremely high reliability or safety, such as the
following:
•
Medical equipment that directly affects human life.
•
Equipment that may result in personal injury (such as equipment directly related to the operation and control
of aircraft, ships, railroads, elevators, etc., or equipment that may be subject to constant vibration, such as
automotive and marine equipment).
The product is not for use in high-risk activities. The product is not designed or intended for use in hazardous
environments requiring fail-safe performance, or for use in any circumstance in which the failure of the product
could lead directly to death, personal injury, severe physical or property damage, or that would affect the
operation or safety of any medical or life support device (collectively, "High-Risk Activities"). Anker expressly
disclaims any express or implied warranty of fitness for High-Risk Activities. Anker does not authorize use of
any product in any High-Risk Activities. Any such use is improper and is a misuse of the product.
AU 20
Publicidad
