Publicidad
Idiomas disponibles
Idiomas disponibles
Step 7
P
Position the decorative cover and the gas lift into the central holes of the
chair leg base.
Step 8
Place the seat and chair back flat, aligning them with the base,
and fit them onto the gas lift.
Step 9
S
Insert the armrests into the armrest brackets. Use four armrest screws (M6X30),
four 6mm washers, and two armrest tube washers to secure the armrests to the
armrest brackets. The assembly is now complete.
05
O
Dual-wing lumbar support
adjusts automatically to
wrap around the waist.
Pull the handle to slide the
seat cushion back and forth.
Pull the handle upwards to
adjust the chair's height,
and pull out to recline; push
it in to lock the recline at
three angles.
Safety Installation
Q
1. Each chair is designed to support the weight of one person only.
2. Please use the chair on a flat, even surface.
J
3. Do not allow children under the age of 5 to sit on the chair without supervision.
4. Avoid sitting on the armrest to prevent potential accidents.
5. Do not stand on the chair, use it as a ladder, or step on it.
R
6. Please refrain from placing excessive weight on the chair or using it as a makeshift trolley.
7. Avoid using sharp or pointed objects that could damage the chair, and keep it away from
8. For your safety, do not attempt to disassemble the gas lift mechanism.
Operation Instructions
(Please refer to the actual size.)
open flames or sources of heat.
The chair back and shoulder
rest have five-level height
adjustment.
The armrest surface
adjusts upwards, rotates
inward/outward, and
moves forward/backward.
The armrest height is
also adjustable.
06
Publicidad
