SIHOO M101C-M101 Manual De Usuario página 6

Step 7
Using two M6X40 screws to connect the armrest and backrest by screwing them together,
ensuring they are tightened to 50%.
Step 8
Using four M6X25 backrest screws to connect the backrest and the seat cushion,
and using four M6X25 armrest screws to connect the armrest and seat cushion,
ensuring that all connections are tightened to 100%.
Step 9
Using two M6X40 screws to connect the armrests to the backrest and tighten the screws
to 100%. Align the upper half of the assembled chair with the gas lift and insert it into
place. The assembly is now complete.
05
Operation Instructions
(Please refer to the actual size.)
Push or pull the chassis
right-side lift rod to control
the tilt.
Chair height adjustment:
when seated in the chair, lift
to lower it; when not seated
in the chair, lift to raise it.
Safety Installation
1. Each chair is designed to support the weight of one person only.
2. Please use the chair on a flat, even surface.
3. Do not allow children under the age of 5 to sit on the chair without supervision.
4. Avoid sitting on the armrest to prevent potential accidents.
5. Do not stand on the chair, use it as a ladder, or step on it.
6. Please refrain from placing excessive weight on the chair or using it as a makeshift trolley.
7. Avoid using sharp or pointed objects that could damage the chair, and keep it away from
open flames or sources of heat.
8. For your safety, do not attempt to disassemble the gas lift mechanism.
Adjust the tilt intensity of
the rotating pallet with
the spring knob.
The seat can rotate freely
in 360 degrees.
06