Publicidad
Idiomas disponibles
Idiomas disponibles
Getting started
Settings
G
(Not all features are on all models)
Individual settings for cycle minutes (Time), dryness level (Level) and temperature (Temp) can be set from the
minimum (lowest in column) to maximum (highest in column) . In general, the higher up the column, the more
energy will be used . NOTE: The selected cycle set Time can be further adjusted, in one minute increments, by
pressing the Time Adjust + (plus) and - (minus) buttons .
Dryness Level - Selection only used for Sensor cycles . Timed cycles run for the selected time .
More Dry
Use for heavy-duty or mixed type fabrics .
Dry
Use for a normal dryness level suitable for most loads . This is the preferred cycle for energy savings .
Less Dry
Use for lighter fabrics .
Damp
For leaving items partially damp .
Temperature
High
For regular to heavy cottons .
Medium
For synthetics, blends, delicates and items labeled permanent press .
Low
For delicates, synthetics and items labeled tumble dry low .
No Heat
For fluffing items without heat . For use only with the Air Fluff cycle .
49-3000224 Rev 3
9
Publicidad
