Descargar Imprimir esta página

AAA 9.6 GA12 Manual De Instrucciones página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTRUGnON MANUAL
Industrial Triplex Pumps
INDUSTRIAL TRIPLEX PUMPS
GENERAL SAFETY INFORMAnON
Please read and save these instructions.
Read carefully before attempting to
assemble, install, operate or maintain
the product described. Protect yourself
and others by observing all safety
information.
Failure to comply with
instructions could result in personal
injury and/or property damage! Retain
instructions for future reference.
r.::al
Lh
DANGER: RISK
OF
t:::J!!!!!!!I
INJURY
FROM
SPRAY
Always wear safety glasses or
goggles
and appropriate clothing.
it]
Lh
WARNING: RISK
OF
BURSTING
• The
pump is designed to pump non-
flammable or non-explosive fluids.
These pumps
are
intended
to
pump
clean
filtered
water only.
• Do not operate in or around an
explosive environment.
• Do not after the pump from the
manufacturers design.
• Do
not operate gasoline engines in a
confined area; always have adequate
ventilation.
• Do
not exceed
the
pump specifications
in speed or pressure.
lil]
Lh
WARNING: RISK
OF
HOT SURFACES
• Do
not allow children to operate the
pump.
• Never
point
the
high-pressure
discharge at
a
person, any
part
of the
body
or animals.
• Maximum water temperature is 140°F.
.&.WARNING: This product and
its
exhaust contain chemicals known to
the
State
of California to cause cancer, birth
defects or other reproductive harm. In
addition, some cleaning products and
dust contain chemicals known to
the
State of California
to
cause cancer, birth
defects or other reproductive harm.
Wash hands after handling.
Lh
WARNING: Adequate protective
guards must cover all
mowng
parts.
Perform routine maintenance on the
pump
and
components.
Lh
WARNING: Use only components
that
are
rated for the flow and pressure
of the pump, this would include hose,
fittings, safety valves, spray guns etc.
DESCRIPnON
Designed to work at 3400 RPM when
coupled to
a
gasoline engine.
The 314"
(19, 1
mm) hollow shaft and universal
mounting flange provides connection
to most
314" (19,1
mm) shaft, horizontal
engines.
SPECIFICAnONS
Oil Capacity: 8.0 oz. (237 mQ
Ports
Inlet Port (Supplied): Standard
garden hose connection with inlet
strainer.
Discharge Port (Supplied): M22
connection.
Thermal
Relief Valve
(Supplied):
When the temperature inside the pump
rises too high, this valve will open and
release a gush of water in an effort to
lower the temperature inside the pump.
The valve will then close.
Detergent Injection System (Supplied):
Mixes cleaners or cleaning solvents
with the water to improve cleaning
effectiveness .
NOTICE: Allowing the unit to
run
for
more than two minutes without the
gun trigger being pulled could cause
overheating and damage
to
the pump.
2- ENG
140*213MM

Publicidad

loading

Este manual también es adecuado para:

8.7 ga12530013530011