EN
Mounting front wheels & rear wheels
•
Insert the front wheels into the front axle until you
hear a click. Check that the front wheels are fully
engaged.
•
To remove the front wheels again, press the small
metal button (a) on the side of the front axle and
pull the wheels out of the axle.
•
Insert the rear wheels into the rear axle until you
hear a click. Check that the rear wheels are fully
engaged.
•
To remove the rear wheels again, pull the metal
lever (b) on the top of the respective rear axle up-
wards and pull the wheels out of the axle.
Brake
•
The brake is activated by pressing the brake pedal
downwards.
•
If you press the brake pedal upwards again, the
brake is released and you can continue driving.
- 14 -
b
a