HAEGER Dark River 2200 Instrucciones De Uso página 8

•
Raise the iron slightly up off the material and press the super steam button down firmly.
•
Pause for at least 5 seconds between each jet of steam.
Crease removal in vertical
•
Set the temperature regulator between the (••) and (•••) settings and wait until the iron reaches temperature.
•
Hang the garment on a hanger and place the iron some 10-20 cm away. Never iron a garment if somebody is wearing it at the
time.
•
Press the super steam push button pausing for at least 5 seconds between each press.
Anti-Calc System
This iron has an innovative built-in anti-limescale system, consisting of a resin filter that retains the limescale substances from the
water, so these cannot reach the steam chamber of the soleplate, thus extending the life of the iron.
However, please note that the anti-limescale cartridge will not completely stop the natural process of limescale build-up.
Anti-Drip system
The iron incorporates an anti-drip system that prevents the iron from dripping, even when it is switched off.
•
With the anti-dripping system, you can perfectly iron even the most delicate fabrics.
Self-Cleaning
The function of self-clean is to clean the soleplate after using the iron for approximately 2 months.
1. Fill the water container up to the marking MAX.
2. Insert the plug into the power socket.
3. Set the temperature regulator to the position MAX (•••).
4. Let the iron warm up till the control light cuts off and lights up again.
5. Hold the iron horizontally over a trap vessel.
English - 5