Publicidad
Idiomas disponibles
Idiomas disponibles
8. Malfunction Elimination
Fault
Blender does not
work after being
powered
There is odor for the
first several times of
application
Abrupt pause of work
in the application
Leakage in the 600ml
jar
Abnormal vibration or
too much noise
Blade/dynamo is
stuck
Reason
Jar and the blender are
not screwed tight
Normal situation for the
first application of the
machine
The motor is overheated
and the temperature
control protection stops
working
1. Confirm whether the
jar and blade holder are
screwed tight
2. Confirm whether the
jar is broken
3. Confirm whether the
seal ring is installed
Confirm whether jar and
blade holder are not
screwed tight enough
Confirm whether the
food is too much
Blade is stuck by the
food
English -
Troubleshooting
Screw the jar tight on the
blender
Should there still be odor after
multiple times of applications,
send the blender to the nearest
maintenance point for
inspection
Cool for 20-30 minutes before
application
Screw the jar and blade holder
tight
Place the seal ring horizontally
Screw the jar and blade holder
tight
Turn off the power and take out
the surplus food
Turn off the power, take out
the food and cut it into smaller
slices
6
Publicidad
