HAEGER Heritage Bluetooth Instrucciones De Uso página 5

DEVICE DESCRIPTION
1. ON/OFF button
3. Charging Indicator
5. AUX Jack
7. Previous Track
9. Next Track
11. BT / AUX Indicator
13. FM / USB Indicator
BEFORE FIRST USE CHARGE THE BATTERY
•
Insert the small connector of the USB-C Charging Cable into the Charging port (2) on
the back of the radio device. Insert the large connector into the USB port on a computer,
USB charging device, or 5V USB adapter (Not Included) and plug into a wall outlet.
•
The LED indicator (3) will turn RED while charging and go off when fully charged. On
low power, a tone will be heard, indicating that the radio device needs to be charged.
IMPORTANT NOTE ON LITHIUM-ION BATTERIES
1. PRIOR to using the unit for the first time, please charge fully the battery
2. Charge the battery regularly after each use. Don't wait until it is discharged!
3. DON'T allow the battery to discharge completely, otherwise it will lose 20% of its
capacity or even be totally damaged! If the voltage becomes too low, the internal
circuits are not powered anymore and it will become impossible to recharge the battery!
4. If you don't use the unit for a longer period of time, it is recommended to charge it at
40% of its capacity and check/charge it once per month.
** BATTERIES ARE NOT COVERED BY THE WARRANTY **
•
We cannot be held responsible for damaged batteries further to the non-observance
of these basic rules.
BASIC OPERATION FOR YOUR RADIO
Bluetooth Operation
This unit is equipped with a Bluetooth function which allows for audio to be played
wirelessly from any Bluetooth enabled device.
Keep the radio device and the Bluetooth device within 1m of each other during the pairing
process.
To connect the unit to a compatible Bluetooth device, carry out the following steps:
1) Press the Power On/Off button to turn the unit on.
2) Press the M button until Bluetooth mode is selected. There will be a sound prompt and
the corresponding indicator at the front of the unit will flash blue fast to show
Bluetooth mode has been selected.
3) Turn on your Bluetooth enabled device and activate the Bluetooth function.
2. USB-C Charging Port
4. USB Port
6. MODE
8. Play/Pause
10. FM Tuning knob
12. Volume
English - 5