Delta 23-196 Manual De Instrucciones página 9

002841 002860
HP1 HP2
002839
002862
HP6
HARDWARE PACKAGE
M6 x 16mm carriage bolts (2)
HP1
M6 Lock washers (2)
HP2
M6 Flat washers (4)
HP3
Eye shield locking knobs (2)
HP4
Remove any protective materials and coatings from all of the parts and the tool. The protective coatings can be removed by spraying
WD-40 on them and wiping it off with a soft cloth. This may need redone several times before all of the protective coatings are
removed completely.
If any parts are missing, do not attempt to plug in the power cord and turn "ON" the machine. The machine should
only be turned "ON" after all the parts have been obtained and installed correctly.
UNPACKING
002833
002834
HP3
HP7
HP5 Tool rest locking knob (2)
M5 x 10mm Inner hex head screw with
HP6
M5 Flat Washer and M5 Lock Washer (4)
4mm Hex Wrench (1)
HP7
HP4
9
002845
HP5