Yamaha TT-S303 Manual De Instrucciones página 15

Making adjustments
Adjusting the stylus pressure
Adjust the tone arm so that the appropriate stylus pressure is applied to the
record.
1
Detach the stylus cover.
NOTICE

Take care that the stylus cover or your finger do not contact the
stylus.
2
Set the anti-skating adjustment to the "0" position.
3
Release the tone arm lock.
4
Move the tone arm off of the arm rest and slightly to the left.
NOTICE

Take care that the needle does not contact any part of the unit.
|
Getting ready Making adjustments
15
En