Masterpro BGMP-9058 Manual De Instrucciones página 5

EN
ADJUSTING CLOCK STEP
• Under power off state, press "Time" until the hour is shining.
• Press "Tare", to up the number or "Unit" to down the number.
• Press "Time", minute will be shining.
• Press "Tare", to up the number or "Unit" to down the number.
• Press "Time", adjusting is finished.
ERROR DISPLAY INTRODUCTION
• When the scale is over loaded, the "EEEE" will appear on the
display.
• When the screen shows "LO", it means that the power isn't enough,
please change the batteries as soon as possible.
INTRODUCTION OF USING AND INSTALLING THE BATTERIES
• Use 3PCS AAA batteries.
• When change the batteries, please open the battery cover on the
back, put 3PCS AAA batteries in the battery case (make the positive
poles towards), then close the battery cover tight.
• The product use 3PCS AAA batteries, please install it before using.
ADVICE FOR USE AND CARE
• Put the scale on a clean and flat table.
• The max. weight of the scale is 5000g, which included the weight
before tare.
• To ensure the life of the scale, do not put the scale under wet, hot &
cold condition.
• The product belongs to high precision electronic weighing
apparatus, please do not press or drop the scale otherwise the
scale is easy to damage.
• If the scale surface is dirty, please clean the scale with soft cloth,
neither use any chemical detergent nor allow water to get inside the
8
scale.
• The product is for small goods weighing only, do not use for legal
trade.
• If the result appears improperly, please check about whether the
batteries and the touching point contact well. Replace for new
batteries if used for a long time already, then try again.
TECHNIC PARAMETER
Capacity: 2g - 5000g
Show numerical value: 1g
Battery: 3pcs AAA Batteries
Work temperature: 5°C – 60°C
Display usage: LCD Show, 4 units
9
EN